Cerakoting Service

Cerakote Price List

RG4 ARMS –  CERAKOTE PRICE LIST
PHONE 817-500-9168

Disassembly / Reassembly Is always on top of the Cerakote coating prices. It usually ranges between $25 – $75 depending on the Gun and difficulty. 
Call for accurate pricing.

We have a $50.00 Minimum.
At the present time we are running between 4 – 6 weeks out on single or multi color jobs already broken down.
We are also running about 6 – 12 weeks out on design jobs and some jobs that require brake down and reassembly
These time frames are AFTER we receive your project in the shop.

We do try to carry most Cerakote colors but unfortunately we cannot carry every single one they make.
That being said, Cerakote colors that we do not normally stock will add an additional $35 to your order.

Are you the world’s worst procrastinator? Good news if you are.
We have just added rush service. 
6-14 day service add 15%
5 day service add 25%
3-5 day service add 50%

 

HANDGUN / PISTOL CERAKOTE PRICING:

Slide Only – One Color (stripped) $30.00
Frame Only – One Color (stripped) $50.00

Complete Handgun  – One Color $125.00
Complete Handgun  – Two Colors $150.00
Complete – Custom design up to 3 color  $250.00 + Add stenciled charge below 

Accessories or extras for Pistols
Coat Barrel Only with Cerakote - $30.00
Coat Pistol Magazines – Each (must be one of the colors on gun) $20
Coat Pistol Magazine – Separate Color $25
Hardware Only – $25.00

 

AR TYPE RIFLE & SHOTGUN CERAKOTE PRICING:
Autoloading – AR-15/M4 or AK
Complete Gun: Upper and Lower Receivers, Barrel, Handguard, Pistol Grip, Pins, and Controls
Also includes up to 2 mags One color.
( Does NOT Include stock — except on shotgun )

One Color $150.00
Two Colors $175.00
AR-10 and Variants Surcharge – add to AR-15 pricing $30.00

Pieces Only
Shotgun Metal Only $150.00
AR Upper and Lower Receivers Only – One Color $75.00
AR Upper and Lower Receivers Only – Up to 2 color Upper / Lower / and Handrail One Color – $175.00
AR10 Upper/Lower/ and Handrail One Color – $200.00
Upper/ Lower/ Handrail – 2 color– $225.00
Forearm only – Rail Type (One Color) $50.00
Forearm only – Picatinny Quad Rail (One Color) $60.00

Coat 20/30rd AR Magazines (each) $25.00

Scopes And Scope accessories 
Scope Mounts (One Color) $20.00
Scopes Standard – One Color H-Series $40.00
Scopes Target and Tactical – One Color H-Series (Includes masking of dials, etc) $65.00

Accessories
Barrel – one color $50.00
Stock: Standard A2 or M4 (One Color) $40.00
Stock: Target Adjustable (MagPul, etc) One Color $50.00
Bolt ( Micro Slick) $25.00
Bipod – Broken down (One Color) $30.00
Magazines – $25.00 each one color Minimum of 3
Pins / Action bits and parts only – $35.00
Extra Color Charges for Accessories (Each Color) $15.00

Bolt Action Rifle CERAKOTE PRICING
Rem 700 and similar – One Color – $160.00 – Does not include Bolt
Bolt Action and Tactical 2nd Color surcharge – add $20.00
All metal including bolt – $175.00 – One color
Barreled Action Only – $80.00 – One color
Stock only – $100.00 – One color
Large Tactical Adjustable type stocks – $125.00 – one color
WARNING!!!! WE MUST KNOW IF YOUR STOCK IS FIBERGLASS…. 
Fiberglass does weird things when baked and we recommend NOT doing anything that is fiberglass….
That being said…..  We will coat your fiberglass stocks and parts but you must know that We are NOT responsible for anything that happens to fiberglass parts if you really want them done.

Parts
Coat Bolt to match – $25.00
Bolt Action Rifle Magazines – One Color $20.00
Bolt Action Rifle Magazines – Each Additional Color $10.00

Extra Large Bolt action type Firearms
50 BMG Bolt Action Rifles – One Color $280.00
50 BMG Rifles Additional Colors – Each color, add $25.00
AR-30 and similar .338 Lapua and .408 CheyTac bolt action rifles – one color $230.00
Barrett 82A1 and similar semi-auto 50BMG rifles – One Color $300.00
Barrett 82A1 Magazines, ea – One Color $30.00
Barrett and 50 BMG Magazines – Additional Colors, each: $10.00

SPECIAL WEAPONS: 

Suppressor – $30.00
M249, M240, Etc: CALL
Edged Weapons: CALL

At RG4 Arms, we always offer a 10% discount for military and law enforcement On work performed only.

*NOTE: Prices are subject to change without prior written notice. Not all firearms are the same and sometimes special circumstances may apply. Rg4 Arms will notify the owner of special requirements upon receipt and inspection of the firearm and provide a revised quote before services are performed.

Are you ready to start your coating project? Contact us today to schedule a time.

Tight Tolerance Parts and Markings:

We do not coat sears, springs, bores/chambers or other tolerance critical or high-flex parts. In addition, we do not media blast scopes or other optics and, as a result, there will not be as good an adhesion of the Cerakote to those items.

TOLERANCE: For standard firearms applications it is often inadvisable to coat both pins and pin holes, as the resulting one (1) mil thickness of the coating when applied to rounded surfaces creates increase of two (2) mil to the part tolerance and four (4) mil (.004) when both hole and pin are coated. This is also applicable to auto-pistol slide and frame fit, such as on tight-fitting 1911’s. We typically plug or mask holes and pins and only coat the pin ends. However, we can coat pins and holes and then custom fit these parts after coating for an additional charge. We recommend hand fitting and lapping for 1911 pistol slides and frames as this will yield a precision fit and can help to tighten looser fitting slide/frame combos.

MARKINGS: For receivers, frames, slides, Picatinny rails which have painted on or lightly laser etched markings these markings will be lost during the surface preparation and coating unless they are machine engraved or stamped. If these markings are of great importance we can mask over them, but those areas in and immediately around the markings will not be coated and, as such, will not blend. Manufacturer’s serial numbers will be masked at no additional charge where needed or coated where possible. Some manufacturer model numbers, name etc which are laser engraved will be masked over. This is per BATFE (ATF) regulations. Please consult us for specific requirements.

Cerakote H-Series:
H-Series is the most durable of the standard Cerakote family of coatings and provides the best performance in hardness, wear and scratch resistance, adhesion and rust resistance. It can withstand heat up to 500f – 600f degrees and comes in the widest range of colors. Therefore, we use the H-Series wherever possible. However, it’s a two-part heat cure finish and, therefore, cannot be applied to optics and other items or substrates which cannot, or should not be cured at the required temperatures.

CERAKOTE STANDARD PERFORMANCE METRICS: 

RUST RESISTANCE: Cerakote™ finishes have been tested in salt spray and full emersion and have withstood beyond 3,000 hours in salt spray and hundreds of hours in full emersion testing. These results outperform other finishes by over 10x. This makes Cerakote™ finishes the clear choice for marine environments and other environments subject to high humidity and salt water environments.

WEAR RESISTANCE: Cerakote™ finishes can withstand over 5,000 (5,212) wear cycles per mil (.0001). The Tabor wear test uses an 8″ abrasive wheel applied to a metal plate coated with 1 mil thickness of the Cerakote coating. In addition, Cerakote’s Coefficient of Friction is 80% less than stainless steel against stainless steel. So, when one or both moving parts of a firearm are coated you can expect a significantly longer product duty cycle or service life.

ADHESION: Cerakote finishes have an ASTM D3359 rating of 5B and can withstand a 180° mandrel bend rotation test around a 1/4″ mandrel and a ball bearing impact test of 160 inch-lbs with no cracking or loss of adhesion. This is significant performance given Cerakote’s 9H pencil hardness, which is the highest hardness rating in the scale.

HARDNESS AND SCRATCH RESISTANCE: ASTM D3363 is a 9H pencil hardness and 6H scratch resistance.

FILM THICKNESS: 1.0 mil (Cerakote DFAC “Dry Film Anti-Carbon” is .25 to .50 mil)